21
4-4 CAMERA SETUP
Item Description
1~4
You can setup independently for each channel.
Mask
Check the box to Enable/Disable mask function for LIVE mode
Sharpness
Drag the bar or press ◀ ▶ to adjust Sharpness of your camera from
value 1 to 255. The default value is 1.
Brightness
Drag the bar or press ◀ ▶ to adjust Brightness of your camera from
value 1 to 255. The default value is 128.
Contrast
Drag the bar or press ◀ ▶ to adjust Contrast of your camera from
value 1 to 255. The default value is 100.
Chroma(U)/(V)
Drag the bar or press ◀ ▶ to adjust Chroma of your camera from
value 1 to 255. The default value is 128.
Hue
Drag the bar or press ◀ ▶ to adjust Hue of your camera from value 1
to 255. The default value is 128. ( This function doesn’t support at
PAL system)
Name
Set up name of each channel
Volume
Audio volume for CH1 under LIVE mode and recording mode can be
adjusted.
To Next Page
Loading...
