59
9-5.3 PTZ Control
In the main display, right click on the channel will bring up PTZ control panel as below.
＊PTZ communication protocols from different brands aren’t compatible 100% sometimes.
Therefore, some of these functions may be unavailable.
Icon Description
8 direction key Rotate the PTZ
ZOOM+：Zoom in
ZOOM : Zoom out
Setup the PTZ spot as pre-set N.
FOCUS+ : Focus in
FOCUS-：Focus out
Move to pre-set N.
Set PTZ Preset Setup 16 pre-set N.
Goto PTZ Preset Move to specific pre-set N.
Activate auto pre-set tour＊
PTZ Sensitivity
Setup PTZ sensitivity＊
Setup the “start” and “end” of liner scan.＊
Activate the liner scan cruise.＊
B
Adjust the Brightness (Down is +)
C
Adjust the Contrast (Down is +)
S
Adjust the Sharpness (Down is +)
To Next Page
Loading...
