Icom i2730A - Memory Operation Procedures

28
4
MEMORY OPERATION
New2001
4
MEMORY OPERATION
■ General description
The transceiver has a total of 1000 Memory channels (100
channels in each of 10 memory banks, A to J) and two Call
channels (C0/C1) for the 144 and 430 MHz bands.
The Memory mode is useful to quickly select often-used fre-
quencies.
Memory Channels Descriptions
000–999
Total of 1000 regular Memory chan-
nels
Memory channels are selectable on
either the left or right band, and us-
able for any operating band.
C0/C1
Two Call channels
(C0: 144 MHz, C1: 430 MHz)
Instantly recalls a specified frequen-
cy.
D Memory channel content
The following information can be entered into the Memory
channels:
•Operatingfrequency
•Duplexdirection(DUPorDUP–)andfrequencyoffset
•Memoryname
•Scanskipsetting
•Tuningstep
•Operatingmode
•Subaudibletone encoder, tone squelch or DTCS squelch
ON/OFF
•Subaudible tone frequency, tone squelch frequency or
DTCS code with polarity
•Memorybank
D The number of the Memory channel