Icom i2730A - Setting the Tone Frequency; Setting the Repeater Tone Frequency

New2001
58
8
OTHER FUNCTIONS
New2001
8
OTHER FUNCTIONS
D Setting the Tone frequency
Push [MENU q ]C.
 •EnterstheMENUmode.
w Rotate [DIAL]S to select “C TONE” (TSQL Freq).
Push [ e ï]D.
 •Goestothenexttreelevel.
Rotate [DIAL] r S to select a desired tone frequency.
Selectable options: 67.0 Hz to 254.1 Hz
Push [ t ï]D.
 •Setstheselectedoption,andgoesbacktotheprevioustreelevel.
Push [MAIN BAND] y S.
 •ExitstheMENUmode.
S
ide
S
ide
D
isplay
C
enter
The C, S, or D in the
instructions indicate the
area of the controller.
C: Center
S: Side
D: Display
D Setting the Repeater Tone frequency
Push [MENU q ]C.
 •EnterstheMENUmode.
w Rotate [DIAL]S to select “R TONE” (Repeater Tone).
Push [ e ï]D.
 •Goestothenexttreelevel.
Rotate [DIAL] r S to select a desired tone frequency.
Selectable options: 67.0 Hz to 254.1 Hz
Push [ t ï]D.
 •Setstheselectedoption,andgoesbacktotheprevioustreelevel.
Push [MAIN BAND] y S.
 •ExitstheMENUmode.