Icom i2730A User Manual

70
10
OPTIONS
New2001
10
OPTIONS
•HM-154 h a n d m i c r o p h o n e
•HM-207 r e m o t e -c o n t r o l m i c r o p h o n e
•SP-30 e x t e r n a l s p e a k e r
Cable length: 2.8 m (9.1 ft)
•SP-35/SP-35L
e x t e r n a l s p e a k e r
Used for mobile operation
Cable length
SP-35 : 2 m (6.5 ft)
SP-35L : 6 m (19.7 ft)
•MBF-1
m o u n t i n g b a s e
Used for installing the MBA-5
•MBF-4
m o b i l e b r a c k e t
•MBA-4 c o m b i n a t i o n b r a c k e t
•MBA-5 c o n t r o l l e r b r a c k e t
•OPC-589 m i c a d a p t o r c a b l e
Allows you to connect an 8-pin plug microphone.
•OPC-837
c o n t r o l l e r c a b l e
Cable length: 3.5 m (11.4 ft)
•OPC-440
m i c e x t e n s t i o n c a b l e
Cable length: 5.0 m (16.4 ft)
•OPC-647
m i c e x t e n s t i o n c a b l e
Cable length: 2.5 m (8.2 ft)
•CS-2730
c l o n i n g s o f t w a r e
Free download software
•OPC-474
c l o n i n g c a b l e
Allows data cloning between transceivers.
•OPC-478UC
c l o n i n g c a b l e
Allows data cloning with CS-2730.
•OPC-1156
c o n t r o l l e r e x t e n s i o n c a b l e
Cable length: 3.5 m (11.4 ft)
•UT-133
Bluetooth
®
u n i t
•VS-3 Bluetooth
®
h e a d s e t
Approved Icom optional equipment is designed for optimal
performance when used with an Icom transceiver.
Icom is not responsible for the destruction or damage to an
Icom transceiver in the event the Icom transceiver is used
with equipment that is not manufactured or approved by
Icom.

Icom i2730A Specifications

General

Brand	Icom
Model	i2730A
Category	Transceiver
Language	English