Icom i2730A - Clearing a Memory Channel

35
4
MEMORY OPERATION
New2001 New2001
■ Clearing a Memory channel
Entered memory content can be cleared (erased), if desired.
NOTE: Once you clear a memory content, it cannot be re-
covered.
•TheoperationsarefortheMAINband.
Push [MR CALL] q S.
 •SelectstheMemorymode.
 •Whenyouclear aCall channel,holddown[MRCALL]S for 1
second to select the Call channel mode.
Push [MW] w C to display the Memory entry screen.
Rotate [DIAL] e
S to select “CLEAR.”
Push [ r ï]D.
Rotate [DIAL] t
S to select a desired channel to be cleared.
Select
Push [ y ï]D.
 •Displays“CLEAR?.”
Rotate [DIAL] u S to select “YES.”
Push [ i ï]D.
 •Beepssound.
 •Clearsthememorycontent.
S
ide
S
ide
D
isplay
C
enter
The C, S, or D in the
instructions indicate the
area of the controller.
C: Center
S: Side
D: Display