EasyManuals Logo

Icom i2730A User Manual

Icom i2730A
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
iii
New2001 New2001
DO NOT use harsh solvents such as benzine or alcohol to clean
the transceiver, as they will damage the transceiver’s surfaces. If
the transceiver becomes dusty or dirty, wipe it clean with a soft,
dry cloth.
DO NOT use or place the transceiver in areas with tempera-
tures below –10°C (+14°F) or above +60°C (+140°F). Be aware
that temperatures on a vehicle’s dashboard can exceed +80°C
(+176°F) in direct sunlight, resulting in permanent damage to the
transceiver if left there for extended periods.
DO NOT place the transceiver in excessively dusty environ-
ments or in direct sunlight.
DO NOT place the transceiver against walls or putting anything on
top of the transceiver. This will obstruct heat dissipation.
Place the transceiver in a secure place to avoid inadvertent use
by children.
During mobile operation,
NEVER place the transceiver where
air bag deployment may be obstructed.
During mobile operation,
DO NOT place the transceiver where
hot or cold air blows directly onto it.
During mobile operation,
DO NOT operate the transceiver with-
out running the vehicle’s engine. When the transceiver’s power
is ON and your vehicle’s engine is OFF, the vehicle’s battery will
soon become exhausted.
Make sure the transceiver power is OFF before starting the ve-
hicle engine. This will avoid possible damage to the transceiver
by ignition voltage spikes.
During maritime mobile operation, keep the transceiver and mi-
crophone as far away as possible from the magnetic navigation
compass to prevent erroneous indications.
BE CAREFUL! The rear panel will become hot when operat-
ing the transceiver continuously for long periods of time.
Use Icom microphones only (supplied or optional). Other manu-
facturer’s microphones have different pin assignments, and may
damage the transceiver.
PRECAUTIONS (Continued)
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom
Incorporated (Japan) in Japan, the United States, the United King-
dom, Germany, France, Spain, Russia, and/or other countries.
The Bluetooth word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by Icom
inc. is under license.
All other products or brands are registered trademarks or trademarks
of their respective holders.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Icom i2730A and is the answer not in the manual?

Icom i2730A Specifications

General IconGeneral
BrandIcom
Modeli2730A
CategoryTransceiver
LanguageEnglish

Related product manuals