Icom i2730A User Manual

New2001
84
13
MAINTENANCE
New2001
13
MAINTENANCE
PROBLEM POSSIBLE CAUSE SOLUTION REF.
Transmitting is impossible. •ThePTTLockfunctionisactivated.
•TheBusyLockoutfunctionisactivated.
•Thefrequencyisoutoftheamateurband.
•SetthePTTLockfunctiontoOFFinEXMENU.
•Set the Busy Lockoutfunctionto OFF in EX-
MENU.
•Settheamateurbandfrequency.
p. 15
p. 15
p. 24
The displayed frequency does not
change when [DIAL]S is rotated..
•TheLockfunctionisON.
•TheMemoryorCallchannelisselected.
•TurnOFFthefunction.
•Push[V/MHzSCAN]S to select the VFO mode.
p. 25
p. 23
A Programmed scan does not start. •TheVFOmodeisnotselected.
•The same frequencies are entered into the
scan edges.
•Push[V/MHzSCAN]S to select the VFO mode.
•Enter differentfrequenciesintothescan edg-
es.
p. 23
p. 38
A Memory scan does not start. •TheMemorymodeisnotselected.
•2 or more memory channels have not been
programmed.
•Push[MRCALL]S to select the Memory mode.
•Programmorethan2Memorychannels.
p. 23
p. 30
Cannot receive on the SUB band. •TheSUBbandmutefunctionisactivated. •TurnOFFthefunction. p. 16
While transmitting, automatically
switches to reception.
•TheTime-OutTimerfunctionisactivated. •TurnOFFthefunction. p. 15
S
ide
S
ide
D
isplay
C
enter
The C, S, or D in the
instructions indicate the
area of the controller.
C: Center
S: Side
D: Display

Icom i2730A Specifications

General

Brand	Icom
Model	i2730A
Category	Transceiver
Language	English