Icom IC-7100

11
MEMORY OPERATION
11-14
Previous view
Memo pad function (Continued)
You can call up a Memo pad by pushing
MPAD
(R)
one or more times while in either the VFO or Memory
mode.
• The Memo pad content is called up, starting from the most
recently written.
When you call up a Memo pad, the previously displayed
content is automatically stored in a temporary pad. The
temporary pad can be recalled by pushing
MPAD
(R)
one or more times.
• You may think there are 6 Memo pads because 6 different
frequencies (5 are in Memo pads and 1 is in the temporary
pad) are called up by
MPAD
(R).
If you change the contents called up from a Memo
pad, the stored temporary pad content is replaced
with the changed content.
Calling up the D Memo pads
Operating frequency of the VFO
or Memory mode
Memo pads
Newest
Oldest
MPAD
MPAD