Icom IC-7100

11
MEMORY OPERATION
11-8
Previous view
Any no longer used regular Memory channels can be
cleared, and then become blank channels.
Touch the Memory channel number indication once q
or twice to select the Memory mode. (p. ??-??)
Rotate [BANK]( w L) or [M-CH](L) to select the Mem-
ory channel to be cleared.
Push e
MENU
(C) one or more times to select the “M-
3” screen (Menu 3).
Touch [MEMO]( r D).
Touch [M-CL]( t D) for 1 second to clear the contents.
• The programmed contents disappear.
• “BLANK” appears.
Touch [M-CL]
for 1 second.
Touch
[MEMO].
Clearing a Memory channel
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
L
eft
R
ight
C
enter
D
isplay