Icom IC-7100

6
FUNCTIONS FOR TRANSMIT
6-6
Previous view
Transmit fi lter width selection
(Mode: SSB )
The transmit fi lter width for the SSB mode can be se-
lected from Wide, Mid or Narrow. This setting can be
memorized each for the Speech Compressor ON and
OFF.
Select the desired frequency band. (p. 3-5) q
On the Mode selection screen, select the USB or w
LSB mode. (p.3-??)
Push e
MENU
(C) one or more times to select the
“M-2” screen (M-2 menu).
Touch [COMP]( r D)
to turn ON the Speech Compres-
sor.
• “COMP” appears.
Touch [TBW]( t D) for 1 second one or more times a
Wide, Mid or Narrow transmission passband width
.
• Touch [TBW](D) to display the selected TX fi lter width for
approximately 1 second.
• The following fi lters are specifi ed as the defaults. Each of
the fi lter widths can be set in the “TBW” items of the “Tone
Control” Set mode. (p. 165)
SET
(C) > Tone Control > TX > SSB
> TBW (WIDE), TBW (MID), TBW (NAR)
- WIDE: 100 Hz to 2900 Hz
- MID: 300 Hz to 2700 Hz
- NAR: 500 Hz to 2500 Hz
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
L
eft
R
ight
C
enter
D
isplay
Touch [TBW] for
1 second
Push
MENU
The selected transmit fi lter width is
displayed for approximately 1 second.