12
SCAN OPERATION
12-6
Previous view
Voice Squelch Control function
(Mode: SSB/AM/FM
)
This function is useful when you do not want unmodu-
lated signals pausing or cancelling a scan. When the
Voice Squelch Control (VSC) function is ON, the receiv-
er checks received signals for voice components.
The scan pauses, or is cancelled, if a received signal
includes voice components, and the tone of the voice
components changes within 1 second. See “Squelch
status” as described on page ??-??.
The scan resumes if the received signal includes no
voice components, or the tone of the voice components
does not change within 1 second.
Select SSB, AM or FM as the operating mode. q
Push w
QUICK
(D) to open the Quick Menu window.
Touch [VSC]. e
Touch the desired option. r
• “ ” appears when the VSC function is ON.
• When you touch an option, it is automatically saved and
goes back the previous tree level.
• The VSC function is usable in the phone modes
(SSB, AM and FM).
• The VSC function resumes the scan on unmodu-
lated signals, regardless of whether the Scan Re-
sume function is set to ON or OFF.
QUICK
Touch [VSC].
Touch a desired
option.
(Example: ON)
Appears
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
L
eft
R
ight
C
enter
D
isplay
NOTE: While listening to the radio with the VSC
function ON, the audio may be interrupted. The mu-
sic or a commercial, including narration or BGM, is
not detected as an audio component. In this case,
turn OFF the VSC function.
To Next Page
Loading...
