Icom IC-7100

6
FUNCTIONS FOR TRANSMIT
6-4
Previous view
Break-in function (Continued)
Push q
SPEED/PITCH
(C) to open the Key speed/CW pitch
adjustment window.
Rotate [M-CH] w (L) to adjust the Key speed.
• The adjustable key speed is between 6 and 48 wpm
(words per minute).
Push e
MENU
(C) to close the window.
SPEED/PITCH
[M-CH]
When using a paddle:
Adjust the keying speed while operating a paddle.
Full Break-in operation D
During Full Break-in operation, the transceiver trans-
mits when you key down, then immediately returns to
receive when you release.
On the Mode selection screen, select the CW or q
CW-R mode. (p.3-??)
Push w
MENU
(C) one or more times to select the
“M-3” screen (M-3 menu).
Touch [BK-IN]( e D) one or more times
to turn ON the
Full Break-in function.
• “F-BKIN” appears.
Full Break-in icon
Touch [BK-IN]
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
L
eft
R
ight
C
enter
D
isplay