Icom IC-7100

13
USING AN SD CARD
13-12
Previous view
For easy operation, the repeater list is preloaded into
your transceiver.
This section describes how to manually update the re-
peater list using an SD card.
The latest setting fi le, which includes the repeater list,
can be downloaded from the Icom website.
Downloading the latest setting fi le (ICF fi le)1.
q Access the following URL to download the latest
data.
http://www.icom.co.jp/world/support/download/fi rm/
index.html
• The latest settings fi le (ICF fi le) and repeater list (CSV;
Comma Separated Values fi le) are contained in the
downloaded ZIP fi le.
File Name: 7100_U_130301.zip
Depending on the
updated fi le date.
Depending on the version.
This instruction manual describes when the fi le name
is “7100_U_130301.zip,” for example.
w Decompress the compressed fi le that is downloaded
from the Icom website.
“7100_U_130301” folder will be created in the same
place where the downloaded file is saved.
Inserting the SD card into a PC2.
e Insert the SD card into the SD card drive on your
PC.
• Icom recommends that you format all SD cards to
be used with the IC-7100, even preformatted SD
cards for PCs or other uses.
See page ?-? for details of inserting and removing
the SD card.
Copying the latest ICF fi le to the SD card3.
r Double-click the “7100_U_130301” folder created in
the same place where the downloaded file is saved.
t Copy the ICF fi le (Example: “7100_USA_130301.
icf”) in the folder to the “Setting” folder in the “IC-
7100” folder of the SD card.
Continued on the next page ☞
Click
Click
IC-7100
Cloning software(Rev. MM) and manuals
2013/3/MM
IC-7100’s latest setting fi le is uploaded to
“Cloning software(Rev. MM) and manuals” in
the Icom website screen.
• The displayed contents may differ.
Updating the repeater list
SD card
Transceiver
to the Card
reader
PC