EasyManua.ls Logo

Icom IC-7100

Icom IC-7100
197 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
SET MODE
17-23
Previous view
RX HPF/LPF (Default: [----] - ----)
Tone Control > RX > (Mode) > RX HPF/LPF (RX HPF/
LPF)
(Mode: SSB/CW/RTTY/AM/FM/DV)
First select the operating mode, then set the receive
audio high-pass fi lter to between 100 Hz and 2000 Hz
in 100 Hz steps.
RX HPF/LPF (Default: ---- - [----])
Tone Control > RX > (Mode) > RX HPF/LPF (RX HPF/
LPF)
(Mode: SSB/CW/RTTY/AM/FM/DV)
First select the operating mode, then set the receive
audio low-pass fi lter to between 500 Hz and 2400 Hz
in 100 Hz steps.
RX Bass (Default: 0)
Tone Control > RX > (Mode) > RX Bass (RX Bass)
(Mode: SSB/AM/FM/WFM/DV)
First select the operating mode, then set the receive
audio bass level to between –5 and +5.
RX Treble (Default: 0)
Tone Control > RX > (Mode) > RX Treble (RX Treble)
(Mode: SSB/AM/FM/WFM/DV)
First select the operating mode, then set the receive
audio treble level to between –5 and +5.
TX Bass (Default: 0)
Tone Control > TX > (Mode) > TX Bass (TX Bass)
(Mode: SSB/AM/FM/DV)
First select the operating mode, then set the transmit
audio bass level to between –5 and +5.
TX Treble (Default: 0)
Tone Control > TX > (Mode) > TX Treble (TX Treble)
(Mode: SSB/AM/FM/DV)
First select the operating mode, then set the transmit
audio treble level to between –5 and +5.
TBW (WIDE) (Default: 100 - 2900)
Tone Control > TX > SSB > TBW (WIDE) (TBW
(WIDE))
(Mode: SSB)
Set the lower and higher cut-off frequencies of the
transmission passband width for your wide setting.
• Lower: 100, 200, 300 or 500 Hz
• Higher: 2500, 2700, 2800 or 2900 Hz
TBW (MID) (Default: 300 - 2700)
Tone Control > TX > SSB > TBW (MID) (TBW (MID))
(Mode: SSB)
Set the lower and higher cut-off frequencies of the
transmission passband width for your middle setting.
• Lower: 100, 200, 300 or 500 Hz
• Higher: 2500, 2700, 2800 or 2900 Hz
TBW (NAR) (Default: 500 - 2500)
Tone Control > TX > SSB > TBW (NAR) (TBW (NAR))
(Mode: SSB)
Set the lower and higher cut-off frequencies of the
transmission passband width for your narrow setting.
• Lower: 100, 200, 300 or 500 Hz
• Higher: 2500, 2700, 2800 or 2900 Hz
Tone Control Set mode

Table of Contents

Other manuals for Icom IC-7100

Related product manuals