Icom IC-7100

17
SET MODE
17-11
Previous view
<<REC Start>>
Voice Memo > QSO Recorder > <<REC Start>>
Insert an SD card into the transceiver before select-
ing this item.
Touch [<<REC Start>>] to start voice recording.
• “Recording started.” appears.
• [<<REC Stop>>] is displayed while recording.
Once recording has started, the recording will con-
tinue, even the transceiver is rebooted.
To stop the recording, touch [<<REC Stop>>].
Play Files
Voice Memo > QSO Recorder > Play Files (PLAY FILES)
Insert an SD card into the transceiver before select-
ing this item.
Do the following steps to play back the recorded audio
on the SD card.
Touch [Play Files], and folders on the SD card are dis-
played.
• These folders contain the stored fi les.
Playing back
Touch [ q ∫] or [√], or rotate [DIAL] to select the folder
that includes the desired fi le to play back, and then
touch the folder.
Touch [ w ∫] or [√], or rotate [DIAL] to select the fi le to
play back, and then touch the fi le.
• The VOICE PLAYER screen is displayed and the select-
ed fi le is played back.
• See “Operation while playing back” for forwording or re-
winding. (p. ??-??)
Push e
MENU
or touch [] on the display to stop the
playback.
• Returns to the fi le list screen.
NOTE:
• The folder name is automatically created, as shown
in the example below:
(Example) Recording date: 2013/3/1
Folder name: 20130301
• The fi le name is automatically created, as shown in
the example below:
(Example) Recording date: 2013/3/1 15:30:00
File name: 20130301_153000
• The voice audio is recorded onto an SD card, and
saved in the “wav” format.
The recorded voice audio can also be played back
on a PC.
The extension, “wav,” is not displayed on the trans-
ceiver’s screen.
REC Mode (Default: TX&RX)
Voice Memo > QSO Recorder > Recorder Set > REC
Mode (REC Mode)
Records both the transmitted and received audio as the
default setting.
• TX&RX: Records both the transmitted and received
audio.
• RX Only: Records only the received audio.
When transmitting while recording
When “OFF” is selected in File Split, the recording is
paused. After you stop transmitting, the recording re-
sumes.
When “ON” is selected in File Split, a new fi le is auto-
matically created, and the transmitted audio is recorded
into the new one.
RX REC Condition (Default: Squelch Auto)
Voice Memo > QSO Recorder > Recorder Set > RX
REC Condition (RX REC Condition)
Select whether or not the squelch status affects the RX
voice audio recording.
• Always: The transceiver always records the RX
audio regardless of the squelch sta-
tus.
• Squelch Auto: The transceiver records the RX audio
only when a signal is received (the
squelch is opened).
When the squelch closes while record-
ing, the recording will continue for 2
seconds, and then pause.
When “ON” is selected in File Split, and if the squelch
either opens or closes while recording, a new fi le is
automatically created.
Voice Memo Set mode