15
VOICE TX FUNCTION
15-4
Previous view
Each Voice TX memory, [T1] through [T4], can be pro-
grammed with an alphanumeric name of up to 16 char-
acters.
[EXAMPLE]: Programming the memory name “Con-
test” in [T1].
Push q
MENU
(C) one or more times to select the “M-
2” (Menu 2) screen.
• In the DR mode, select the “D1” screen.
Touch [VOICE]( w D) to select the Voice TX mode.
• “VOICE TX” screen is displayed.
Push e
MENU
(C) to display the “VOICE” screen.
Touch [REC]( r D) to display the “VOICE TX RECORD”
screen.
Touch the desired memory, [T1] through [T4], t for 1
second to program.
Touch [Edit Name] to display the “VOICE TX RE- y
CORD (T1)” screen (Voice TX name edit screen).
• A cursor appears and blinks.
Touch the desired block one or more times to u select
the desired character or symbol.
Selectable characters and symbols
A to Z, a to z, 0 to 9, ! # $ % & \ ? " ’ ` ^
+ – ✱ ⁄ . , : ; = < > ( ) [ ] { } ¦ _ ¯ @ (space)
• Touch “AB12” to toggle between the Alphabet input
and Number input mode.
• Touch [CLR](D) to delete the selected character, symbol
or number.
• Touch [SYMB](D) to open the Symbol character selec-
tion window.
• Touch “” to input a space.
Programming a memory name
Touch
[Edit Name].
Touch [REC]
(Example)
Touch [T1] for
1 second.
Continued on the next page. ☞
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
L
eft
R
ight
C
enter
D
isplay
Input a space
Move the cursor
Delete a character
Select an
input mode
Enter
Cancel edit
Move the cursor
Input mode screen
Touch [!"#] to
open the Symbol
character selec-
tion window.
Memory name edit screen
To Next Page
Loading...
