EasyManua.ls Logo

Icom IC-7100

Icom IC-7100
197 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
SET MODE
17-17
Previous view
The QSO log contents are shown below:
Content Example Description
TX/RX TX RX Transmission and reception
Date 12/23/2012
13:51:48
12/23/2012
13:51:48
Date and time the call was started.
Frequency 438.010000 438.010000 Operating frequencies
( When Duplex is set, the frequencies of the called are displayed.)
Mode DV DV Operating mode (All mode)
My Latitude 34.764667 34.764667 Your latitude (unit: degree) +: North latitude, –: South latitude
My Longitude 135.375333 135.375333 Your longitude (unit: degree) +: East longitude, –: West longitude
My Altitude 50.5 50.5 Your altitude (unit: ft) Records to one decimal place.
RF Power 100% (Blank) TX output power level
S Meter (Blank) S0
The relative signal strength of the receive signal (in sixteen levels)
RPT Call Sign JP3YHJ A JP3YHJ A Repeater call sign (DV mode only)
TX Call Sign CQCQCQ (Blank)
TX Call sign
(DV mode only)
RX Call Sign (Blank) JA3YUA A
RX Call sign
(DV mode only)
RX Latitude (Blank) 34.764667 Caller’s latitude, if sent. (unit: degree) +: North latitude, –: South latitude
Records
only when you receive in the DV mode.
RX Longitude (Blank) 135.375333 Caller’s longitude, if sent. (unit: degree) +: East longitude, –: West longitude
Records
only when you receive in the DV mode.
RX Altitude (Blank) 30.5 Caller’s altitude, if sent. (unit: ft)
Records
only when you receive in the DV mode.
The RX History log contents are shown below:
Content Example Description
Frequency 438.010000 RX Frequency
Mode DV Operating mode (DV is fi xed)
Caller JA3YUA A Call sign of the caller station
/ 7100 Note after the call sign
Called CQCQCQ Call sign of the called station
Rx RPT1 JP3YHH G
Access repeater call sign of the caller station or the gateway repeater call sign
of your local area repeater.
Rx RPT2 JP3YHJ A Access repeater call sign of the called station
Message Hello CQ D-STAR! Message included in the received call (up to 20 characters)
Status (Blank)
Normal: blank, Uplink: UPLINK,
Access repeater reply: “UR?” or “RPT?”
Received date 12/23/2012
13:51:48
Date and time the call was received
Depending on the setting, the format may differ.
BK * BK call:
*
”, Normal call: Blank
EMR * EMR call:
*
”, Normal call: Blank
Latitude 34.764667 Caller’s latitude, if sent. (unit: degree) +: North latitude, –: South latitude
Longitude 135.375333 Caller’s longitude, if sent. (unit: degree) +: East longitude, –: West longitude
Altitude 30.5 Caller’s altitude, if sent. (unit: ft)
SSID -A Records one of 0, -1 to -15 and -A to -Z.
GPS-A Symbol Car Icon: Converts to text
None: Code
Course 123 Caller’s course (unit: degree)
GPS Time Stamp 12:00:00 Time data that the caller station acquires the position data
GPS Message
Osaka City/IC-7100
Caller is “DV-G”: Records the GPS message
Caller is “DV-A: Records the GPS-A comment
QSO/RX Log Set mode (Continued)

Table of Contents

Other manuals for Icom IC-7100

Related product manuals