Icom IC-7100

17
SET MODE
17-29
Previous view
Choose your language carefully
When the system language of the transceiver is set to Japanese, the IC-
7100 has the capability to display both English and Japanese characters.
HOWEVER, if you select Japanese as the display language (p. ??-??), all
menu items throughout the IC-7100 system will be displayed in only Japa-
nese characters. There will be no English item names. Unless you are fl uent
in reading Japanese characters, use this feature with extreme caution.
If you change the IC-7100’s language to Japanese, and can’t understand
the menu system in the new setting, you will have to change the language
back to English in “Display Language” or “System Language” (this item),
or by doing a partial reset of the IC-7100 CPU. A partial reset will not clear
your call sign databases.
To do a partial reset of the CPU, do the following steps:
1. Push
SET
.
2. Touch [∫] or [√] to select the bottom item, and then touch it.
3. Touch [∫] or [√] to select the bottom item, and then touch it.
4. Touch [∫] or [√] to select the upper item, and then touch it.
5. The dialog appears. Touch [∫] or [√] to select the upper option, and then
push touch it.
- The transceiver displays “PARTIAL RESET,” then the partial reset is
completed.
Display Set mode (Continued)