Icom IC-718 - Page 48

N Others set mode (Continued)
RTTY Keying Polarity Normal
Selects the RTTY keying polarity. Normal or reverse
keying polarity can be selected. (default: Normal)
When reverse polarity is selected, Mark and Space
are reversed.
• Normal : Key open/close = Mark/Space
• Reverse : Key open/close = Space/Mark
PSK Tone Frequency 1500
Selects the desired PSK tone frequency for the PSK
reception from 1000, 1500 and 2000 Hz.
(default: 1500 Hz)
SPEECH Language English
Selects the speech language from English and
Japanese. (default: English)
SPEECH Speed HIGH
Selects the speech speed from HIGH (faster) and
LOW (slower). (default: HIGH)
SPEECH S-Level ON
The IC-7600 speech processor can announce fre-
quency, mode and signal level. Signal level an-
nouncement can be deactivated if desired.
(default: ON)
When “OFF” is selected, the signal level is not an-
nounced.
SPEECH [MODE] Switch OFF
Selects the operating mode speech capability when
a mode switch is pushed; ON or OFF.
(default: OFF)
When “ON” is selected, the selected operating mode
is announced when a mode switch is pushed.
[SPEECH/LOCK] Switch SPEECH/LOCK
Selects the [SPEECH/LOCK] switch action. • SPEECH/LOCK : (Push) The voice synthesizer
function is activated.
(Push and hold) The dial lock
function is turned ON or OFF.
• LOCK/SPEECH : (Push) The dial lock function is
turned ON or OFF.
(Push and hold) The voice syn-
thesizer function is activated.
131
10
SET MODE