8
3
BASIC OPERATION
■ Calling
The following call operations can be performed using the pre-
programmed dialing number.
D Group call
Select the desired group code that is stored in the memory
using [Group selector] or [Up]/[Down].
Up to 16 group codes with [Group selector], up to 40 group
codes with [Up]/[Down] can be selected.
q Rotate [Group selector] or [Up]/[Down] to select the de-
sired group code.
GROUP 1
The pre-programmed text
name is displayed.
90
When no text name is pro-
grammed, a group code is
displayed.
w Push [PTT] or [Call Set Up] to make a group call.
• “CALLING” is displayed and the calling beeps sound.
CALLING
e When the call is succeeded, “CONNECT” and “ ” appear,
and communication can be made.
• The communication timer starts count down at the same time.
(When no transmission time limit is set, the timer counts up.)
CONNECT
TIM 0 56
r The warning beeps sound 10 sec. before the communica-
tion timer is activated.
• The communication is disconnected automatically when the
communication timer is activated.
t Push [Clear] to disconnect the communication manually.
• Pushing [M] and [#] in sequence also disconnect the communi-
cation. (10-key version only)
CLR DOWN
To Next Page
Loading...
Need help?
General
