■ Special call with the keypad
D Re-dial
Push [#] twice to re-call the previously called individual or
group station(s).
D Short dialing
Push one of [1] to [9] and [#], to make a call with the stored
individual or group code in the memory 1 to 9.
■ Receiving a call
D Receiving an individual call
q When an individual call is received, calling ring sounds.
• “ALERTING” and the calling station code (or text name if the
calling code is memorized in the memory) are displayed alter-
nately.
⇔
• When the call from a telephone, “TEL” (PSTN) or “PABX” is dis-
played.
w Push [PTT] or [#] to start the communication.
• The communication timer is displayed and starts count down.
(When no transmission time limit is set, the timer counts up.)
• The channel number and the communication timer are displayed
simultaneously (illustrated as at below right) when the communi-
cation channel number indication is set to ON. (p. 27)
e The warning beeps sound 10 sec. before the communica-
tion timer is activated.
• The communication is disconnected automatically when the
communication timer is activated.
r Push [Clear] to disconnect the communication manually.
• Pushing [M] and [#] in sequence also disconnect the communi-
cation. (10-key version only)
• The transceiver returns to stand-by condition.
17
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
ALERTING 302
TEL PABX
TIM 0 56 0020 0 56
To Next Page
Loading...
Need help?
General
