Icom IC-F43GS Instruction Manaul

D Status call
➥฀฀Push [M], [0], [xx]*, [M], individual code and [#] in sequence
to make a status call to the desired station.
➥฀฀
Push [
M], [0], [xx]* and [#] in sequence to make a status
call to the despatcher.
➥฀฀
Push [
M], [0] and [#] in sequence to make a Call Back Re-
quest status call to the despatcher
➥฀ Push [#], [0] and [#] in sequence to make a cancellation
of the above Call Back Request status call to the des-
patcher.
➥฀฀
Push [
M], [0], [M], individual code and [#] in sequence to
make the Call Back Request status call to the individual
code station.
➥฀฀
Push [#], [0], [
M], individual code and [#] in sequence to
make the cancellation of the above Call Back Request sta
-
tus call to the individual code station.
* xx is a status code number from 00 to 31.
NOTE: The same manner as the individual call (p. 12) is
used when making an individual status call to the different
prefix and/or fleet code.
D PSTN call
Push [0], telephone number (1-digit or more) and [#] to make
a phone call through the public telephone network.
The system must be compatible to the PSTN.
D Enhanced group call
• Conference call
Push [
M], [1], [M], group code and [#] in sequence to make a
conference call.
All stations in the called group can be communicated with the
conference call.
• Broadcast call
฀Push [M], [1], [1], [M], and group code and [#] in sequence to
make a broadcast call.
All stations in the called group can only listen to the an
-
nouncement from the calling station.
NOTE: The same manner as the group call (p. 12) is used
when making a conference or broadcast call to the differ
-
ent prefix and/or fleet code.
D SDM (Short Data Message) call
➥฀฀Push [
M], [2], [M], SDM memory number and [#] in se-
quence to make an SDM call (up to 24-digit; including
M, 2
and
M) to the previously selected station or group.
➥฀฀
Push [
M], [2], [M], SDM memory number, individual code and
[#] in sequence to make an SDM call (up to 24-digit; includ
-
ing
M, 2, M and individual code) to the desired station.
NOTE: The same manner as the individual call (p. 12) is
used when making an individual SDM call to the different
prefix and/or fleet code.
13
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

Icom IC-F43GS Specifications

General

Brand	Icom
Model	IC-F43GS
Category	Transceiver
Language	English