Icom IC-F43GS - Optional Unit Installation; General Optional Unit Installation

34
10
BATTERY CHARGING
■ Optional battery chargers
D Rapid charging with the BC-160
The optional BC-160 provides rapid charging of optional Li-
Ion battery packs.
• An AC adapter (may be supplied with BC-160 depending
on version) or the DC power cable (OPC-515L/CP-17L) is
additionally required.
AC adapter
(Not supplied with
some versions.)
Optional OPC-515L
(for 13.8 V power
source) or CP-17L
(for 12 V cigarette
lighter socket) can
be used instead of
the AC adapter.
BATTERY
PACK
TRANSCEIVER
Turn power OFF
D AD-106 installation
The AD-106 CHARGER ADAPTER must be installed into the
BC-119N or BC-121N before battery charging.
➥฀฀
Connect the AD-106
CHARGER ADAPTER and the BC-119N/
BC-121N as below, then install the AD-106 into the holder
space of the BC-119N or BC-121N with the supplied
screws.
Screws supplied
with the charger
adapter
AD-106
Connectors
Plugs