Icom IC-F43GS Instruction Manaul

■ Battery case (BP-240)
When using the optional battery case, install 6 × AAA (LR03)
size alkaline batteries as illustrated at right.
q Unhook the battery cover release hook (q), and open the
cover in the direction of the arrow (
w). (Fig.1)
w Then, install 6 × AAA (LR03) size alkaline batteries.
(Fig.2)
• Install the alkaline batteries only.
• Be sure to observe the correct polarity.
• Do not place the ribbon over the batteries.
e Fit the cover in the direction of the arrow (e), then close
(r). And hook the battery cover release hook until it
makes a ‘click’ sound (
t). (Fig.3)
CAUTION:
• When installing batteries, make sure they are all the
same brand, type and capacity. Also, do not mix new and
old batteries together.
• Keep battery contacts clean. It’s a good idea to clean bat
-
tery terminals once a week.
• Never incinerate used battery cells since internal battery
gas may cause them to rupture.
•
Never expose a detached battery case to water. If the bat-
tery case gets wet, be sure to wipe it dry before using it.
q
BP-240
w
Fig.1
Fig.2
Fig.3
e
r
t
37
11
OPTIONAL BATTERY CASE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

Icom IC-F43GS Specifications

General

Brand	Icom
Model	IC-F43GS
Category	Transceiver
Language	English