24
5
OTHER FUNCTIONS
■ System lock function
The system lock function disables the roaming function man-
ually.
q Push [M], [5], [1] and [#] in sequence to turn the system
lock function ON.
• The dot indication appears at right edge of the LCD.
w Push [#], [5], [1] and [#] in sequence to turn the system
lock function OFF.
• The dot indication disappears.
■ Call code memory
Up to 4 codes, individual, group or status, can be pro-
grammed from the keypad.
The programmed codes can be selected with [Up]/[Down].
➥ Push [M], [6], [0], [M], [x]*, [M], [code number] and [#] in
sequence to program the desired code into the memory.
• No erasing capability is available, over-write the new code in
such a case.
*x=1 to 4
■ Automatic transmit output
power selection
(Except for the conventional operation)
During trunking operation, the transmit output power is au
-
tomatically selected from High, Low2 and Low1 according to
the received signal strength from the system base.
■ Power ON security
The transceiver has a power ON security that requires the
4-digit password entry at turning the power ON.
The transceiver cannot be used until the correct password is
entered.
To Next Page
Loading...
