30
8
PROGRAMMABLE FUNCTIONS
UP AND DOWN KEYS
➥Push to select the call memory channel.
➥Push to select the call back memory channel.
➥Push to select the status channel.
➥ Push to select the operating channel. (Conventional mode
operation only)
➥ Push to select the setting value or condition during user
set mode.
➥ Push to erase the previously entered digit number (func-
tions as back space key) during dialing number entering
from the keypad. (10-key version only)
LOCK KEY
Push to inhibit the function key operations, except [PTT] and
[Lock].
CLEAR (SET MODE) KEY
➥Push to disconnect the communication (clear down).
➥Push and hold for 2.5 sec. to enter user set menu.
D Conventional mode only
MONITOR KEY
Push to release both the tone and noise squelch mute at the
same time to monitor the signal on the selected operating
channel.
SIMPLEX KEY
The both receive frequency and receive CTCSS frequency
are used as the transmit frequency and transmit CTCSS fre
-
quency, respectively.
Direct communication without a repeater can be made.
To Next Page
Loading...
