18
3
BASIC OPERATION
• When not answering the call
When not answering call with [PTT], the calling station code
is stored into call back memory. (max. 15 channels)
• “
” blinks when a call from the station that the station code
does not stored in the call back memory, is received.
• “
” appears when the call back memory that call back op-
eration has not been performed is/are stored.
➥ Push [Call Back] then [Up]/[Down] to select the desired call
back memory, and then push [PTT] or [Call Set Up] to reply
the call.
• The pre-programmed text name is displayed in case of the call-
ing code is memorized in the memory.
Q01 302
D Receiving an group call
The transceiver waits for a group call with the selected group
code (that is selected with [Group Selector] or [Up]/[Down])
or the pre-programmed group codes (stand-by group).
The transceiver waits for a group call with the pre-pro
-
grammed stand-by group codes when an individual code is
displayed. The pre-programmed stand-by group code is not
displayed on the LCD.
q When a group call is received, beeps sound and the trans-
ceiver turns the communicating condition automatically.
• “GRP” and the calling station code are displayed.
GRP 302
Receiving a group call with the
selected group code.
GRP 1 302
Receiving a group call with the
stand-by group code 1.
To Next Page
Loading...
Need help?
General
