37
6
SET MODE
LCD contrast (Channel indication only)
This item sets the LCD contrast from 1 to 10.
(default: 7)
Q-SET-MODE
--LCD-CONT--ç-7-å
è-RF-GAIN---9
--DIMMER----6>0
--TX-PWR----HI
DD
Quick set mode items
Dimmer (Channel indication only)
This item sets the LCD backlight brightness for dim-
mer selection from 0 (dark) to 10 (bright).
(default: 6>0)
1>0 to 10>0: Lights when some operation is per-
formed, goes out after 30 sec.
1 to 10 : Lights continuously during transceiver
power is ON.
0: Never lights.
Q-SET-MODE
--LCD-CONT--6
è-RF-GAIN---9
--DIMMER----ç-6>0-å
--TX-PWR----HI
TX power selection
This item selects the transmit output power from
HI/MID/LOW. (default: HI)
Q-SET-MODE
--LCD-CONT--6
è-RF-GAIN---9
--DIMMER----6>0
--TX-PWR----ç-HI-å
RF gain level
This item adjusts the receiver gain from 0 (low sensi-
tivity) to 9 (max. sensitivity). (default: 9)
Q-SET-MODE
--LCD-CONT--6
è-RF-GAIN---ç-9-å
--DIMMER----6>0
--TX-PWR----HI
Speaker output ON/OFF
(Channel indication only)
This item sets the speaker output ON or OFF.
(default: ON)
é-SP-OUT----ç-ON-å
--AGC-------ON
--MIC-BL----OFF
--NB--------ON
è-NB-LEVEL--5
To Next Page
Loading...
Need help?
General
