Icom IC-F7000 Instruction Manual

39
6
SET MODE
RIT
This item adjusts the clarity control from –150 Hz to
+150 Hz.
(default: 0)
é-SQL-LV----30
--FILTER----WIDE
--RIT-------ç-0-å
--MODE------USB
--BEEP-LV---5
Mode
This item selects the channel operating mode tempo-
rary from USB, AM, LSB, AFSK, FSK, CW, ALE-U,
ALE-L and EMAIL.
é-SQL-LV----30
--FILTER----WIDE
--RIT-------0
--MODE------ç--USB---å
--BEEP-LV---5
Beep Level
This item adjusts the confirmation beep level from 0
(OFF) to 10 (Maximum).
(default: 5)
é-SQL-LV----30
--FILTER----WIDE
--RIT-------0
--MODE------USB
--BEEP-LV---ç-5-å
Preamplifier (Frequency indication only)
This item sets the receiver preamplifier function ON
or OFF. (default: ON)
Turn this item ON when receiving weak signal.
Q-SET-MODE(VFO)
--MODE------USB
è-RF-GAIN---9
--SQL-LV----30
--PRE-AMP---ç-ON-å
SPLIT (Frequency indication only)
This item sets the split function function ON or OFF.
(default: OFF)
When ON is selected, push [OK
≈≈
] to edit the offset
frequency setting.
é-RIT-------0
--SPLIT-----ç-OFF-å
--BEEP-LV---7

Icom IC-F7000 Specifications

General

Brand	Icom
Model	IC-F7000
Category	Transceiver
Language	English