PRT-KLCD Protege Alphanumeric LCD Keypad User Manual | April 2011 13
2.8 Menu Operation
The Protege LCD keypad uses a well defined menu structure. Shortcuts are provided to these menus without the
need to scroll using the up and down arrow keys. Throughout this manual a keypad menu shortcut will be shown
as [MENU,3,1]. To execute the shortcut press the [MENU] key and then the numerical keys [3] and [1] that
follow.
The Protege LCD Keypad Menu is structured as detailed in the following sections. The installer menu [MENU,4]
is omitted from this manual and should only be accessed by a professionally certified security installer.
Main Menu
The main menu contains all of the menus in the system. A user can only view menus that are assigned to the
menu group in the programmed access level.
1. Area Control (Arming and Disarming Areas)
2. User (Programming Users)
3. Event Review (Reviewing Event Log Information)
4. Installer (Installer Only Access)
5. View (System View and Control)
6. Time (Set Time and Schedules)
7. Bypass (Bypass/Isolate Zone)
8. System (System Functions)
Area Control
To access the area control menu (by default you will be taken to the area control menu automatically when you
logon to the LCD Keypad) press [MENU,1].
User (Sub Menu)
To access the user programming menu press [MENU,2]. The following user sub menus are available.
1. Add/Modify (Add/Modify Users)
2. Menu Groups (Menu Group Programming)
3. Door Groups (Door Group Programming)
4. Area Groups (Area Group Programming)
5. Access Level (Access Level Programming)
6. View Status (View Users Current Location)
Event Review (Sub Menu)
To access the event log review menu press [MENU,3]. The following event sub menus are available.
1. Review (Review System Events)
2. Hex Review (Installer Only Access)
3. Stats (Installer Only Access)
To Next Page
Loading...
