PRT-KLCD Protege Alphanumeric LCD Keypad User Manual | April 2011 63
16.6 Fire Alarm
When a fire alarm occurs, the LCD User Station will emit three audible tones at 2 second intervals until reset by
entering a valid user code. If the zone is a delay fire zone, there is a delay of thirty seconds before the system
contacts the security company or property manager.
A delayed fire zone will prevent unnecessary reporting of false alarms allowing you to reset the fire alarm before a
report is sent. If there is no fire condition, contact your property manager or security company immediately to
avoid an unnecessary response.
A delayed fire zone will automatically cancel if the smoke detector is reset within 30 seconds. Pressing any key
on the keypad during the first 30 seconds will silence the alarm for 90 seconds.
Fire Alarm functions MUST be enabled by your security professional or installation company.
16.7 Smoke Detector Reset
When a fire alarm occurs depending on the installation it may be required to generate a smoke detector reset. To
reset smoke detectors from a keypad press the[CLEAR] key and [ENTER] key together for 3 seconds.
To Next Page
Loading...
