ICT Protege PRT-KLCD - Holidays; Programming Holidays

PRT-KLCD Protege Alphanumeric LCD Keypad User Manual | April 2011 57
14 Holidays
Holidays are used to prevent a schedule from operating during a predefined holiday period. A holiday can be
programmed to be a single day or a period from start until end. To make a holiday repeat the holiday can be
programmed with a blank entry for the year. Holidays are accessed through the time menu [MENU,6,3].

14.1 Programming Holidays
Enter your [USER CODE] to logon to the keypad.
Holiday to
modify: 010
Select the holiday menu item located in the main menu [MENU,6,3]. This will prompt you for a holiday to modify
with the first holiday that is available being shown.
HL010 Start
Date: --/--/----
The display will show the start date entry. Enter the date that you want the holiday to start on. Press [FORCE] to
clear the entry to --:--.
HL010 End
Date: --/--/----
The display will then move to the holiday end date entry. Enter the date that you want the holiday to end on.
Press [FORCE] to clear the entry. Program the same date as the start date for a holiday that is valid for one day.
To make a holiday repeat leave the year section set to ----.
HL010 Hol Group
[********]
The display will show the option entry screen for the holiday groups that this holiday will enable when the holiday
is active. These will be masked with the holiday group in the schedule. An option can be toggled on and off
(enabling holiday group number) by using the numerical keys [1] to [8]. To view the options in text entry mode
press the [STAY] key. Option 1 to 8, are assigned Holiday Group 1 to 8.
If a holiday is active and a period in a schedule is NOT programmed with the holiday group the
schedule will not become valid. If a schedules period is to operate on a holiday the period must have at
least one of the holiday group options programmed that matches the holiday setting.

View Holiday Status
To view the current status of a holiday press the [ARM] key while in the holiday selection screen. The holiday
status screen will be shown.
Holiday to
modify: 010