ICT Protege PRT-KLCD - Regular Arming Areas

PRT-KLCD Protege Alphanumeric LCD Keypad User Manual | April 2011 23
Silencing and Cancelling Alarms
Logon to the LCD Keypad by entering your user code followed by the enter key.
Warehouse
in ALARM
The display will show the area associated with the LCD Keypad you have logged on to with the alarm status. If
you have access to more than one area you are able to scroll the areas using the [] and [] keys.
To search for an area by name press the [MEMORY] key to open the search screen.
Warehouse
is DISARMING
Press the [DISARM] key to silence the alarm and start the disarming process. The display will show the
disarming progress.
Warehouse
is DISARMED
Once the disarming process has completed the display will show the area as being disarmed and the alarms will
be silenced.

3.3 Regular Arming Areas
Regular arming of an area will enable all of the zones in the area and start an exit delay timer allowing you to exit
the area.

Regular Arming Areas
Logon to the LCD Keypad by entering your [USER CODE] followed by the enter key.
Warehouse
is DISARMED
The display will show the area associated with the LCD Keypad you have logged on to and the current status. If
you have access to more than one area you are able to scroll the areas using the [] and [] keys.
To search for an area by name press the [MEMORY] key to open the search screen.
Warehouse
Enabling zone(s)
Press the [ARM] key. The area will enable the zones in the area. The display will show the progress.
Warehouse
Checking zone(s)