PRT-KLCD Protege Alphanumeric LCD Keypad User Manual | April 2011 59
15 Daylight Savings
Daylight savings settings are used to configure the rules associated with processing time changes for daylight
savings in your country. The daylight savings rules are provided to match the international UTC daylight savings
rules. The daylight savings configuration is accessed through the time menu [MENU,6,4].
15.1 Programming Daylight Savings
Enter your [USER CODE] to logon to the keypad.
D/S Starts On Î
1st Sunday
Select the daylight savings menu item located in the main menu [MENU,6,4]. This will prompt you for the starting
rule for daylight savings. Use the [1] and [3] keys to change the start day rule.
D/S Start MonthÎ
October
The starting rule for daylight savings also requires the month to be set. Use the [1] and [3] keys to change the
start month rule setting.
D/S Ends On Î
Last Sunday
This will prompt you for the ending rule for daylight savings. Use the [1] and [3] keys to change the end day rule.
D/S End Month Î
March
The ending rule for daylight savings also requires the month to be set. Use the [1] and [3] keys to change the end
month rule setting.
D/S Options
[********]
The display will show the option entry screen for the daylight savings. Options for daylight savings are currently
reserved and should not be modified from the default value.
Daylight savings will activate at 2:00 AM on the morning of the rule becoming active and either
increment or decrement the time accordingly. An event will be logged indicating that the time has been
changed by a daylight saving operation.
To Next Page
Loading...
