18 PRT-KLCD Protege Alphanumeric LCD Keypad User Manual | April 2011
As shown in the example display the trouble message "
The system or a component of it has a battery problem.
Call service tech.
" is presented to the user.
Press [ENTER] to
acknowledge
If troubles require acknowledgement the user can acknowledge the trouble by pressing the [ENTER] key.
Press [È] to show
next item
To view the next trouble condition (if present) press the down [] key.
Press [MENU] to
exit view mode
If viewing memory is completed the user can press the [MENU] key to exit view mode and return to the main
menu were another action can be performed.
Trouble Groups
Trouble groups split the available troubles in to categories that can be viewed separately. When a trouble
condition occurs in a trouble group the trouble group title will be shown in place of the trouble condition in the
normal trouble display. Press the [ENTER] key to view the troubles within the group.
2.13 General Trouble List
General trouble conditions monitor the system devices and functions for trouble conditions that affect all aspects
of the system.
AC Mains Failure
AC or Mains power that is supplying one of the devices in the system has been lost and that device is operating
on standby battery power.
Low/Missing Battery
A battery is either low or damaged and is not able to provide adequate backup power to a device in the system.
Clock Inaccurate
The real time clock used to log event data is inaccurate. Set the time using the time menu.
Reporting
The system has failed to send a reportable message to the security monitoring company. Inform the security
monitoring company of the trouble condition.
To Next Page
Loading...
