PRT-KLCD Protege Alphanumeric LCD Keypad User Manual | April 2011 27
The display will show the area associated with the LCD Keypad you have logged on to and the current status. If
you have access to more than one area you are able to scroll the areas using the [] and [] keys.
To search for an area by name press the [MEMORY] key to open the search screen.
Office
Enabling zone(s)
Press the [FORCE] key. The area will enable the zones in the area. The display will show the progress.
Office
Checking zone(s)
Once the enabling of the zones has been completed the area will now ensure that the zones in the area are ready
and automatically skip any open zones that can be force armed.
Office
Arm complete
If all the zones are ready the area will complete the arming process and briefly display the message arm complete
to you.
Office
in EXIT delay
After the display period for the arm complete message the display will return to the area status display and show
the exit delay message. You should now leave the area.
Office
is FORCE ARMED
On completion of the exit delay the display will return to the area status display and show the area status as
being force armed.
3.6 Area 24hr Status
All available areas also contain an individual 24HR tamper section that continuously monitors the status of
connected devices in the area. When maintenance is being performed on an area the installer can disable the
24HR monitoring of an area without disrupting other areas.
The 24HR section of an area can only be managed by the installer or a user programmed with the appropriate
option. By default users are not provided access to the 24HR area.
Controlling The 24HR Area Section
Logon to the LCD Keypad by entering your [USER CODE] followed by the enter key.
Office
is DISARMED
To Next Page
Loading...
