PRT-KLCD Protege Alphanumeric LCD Keypad User Manual | April 2011 25
When the zone is not ready to be armed the display will show the zone name on the first line and the zone status
below.
Press [ARM] to
re-test zone(s)
The display will then scroll showing the available options for the zone. Pressing the [ARM] key will start the zone
test from the beginning.
Press [È] to
view next zone
Pressing the [] key will show the next open zone in the system.
Press [FORCE] to
force arm area.
If the area that has been selected can be force armed the option to force arm the area will be shown. Pressing
the [FORCE] key will start the force arming. A zone must be able to be force armed to allow this option to
operate correctly.
Press [BYPASS] to
bypass zone.
If the zone that is shown is able to be bypassed and the user is allowed to bypass zones (they must have the
menu option enabled). Pressing the [BYPASS] key will bypass the zone and proceed with the arming operation.
The bypass menu can also be accessed directly by the menu shortcut [MENU,7,1].
3.4 Stay Arming
This method of arming allows you to remain in the protected area while partially arming the system. Stay zones
are zones that are bypassed when the system is stay armed. For example, if you are working late or going to
sleep and the stay option is programmed you can arm a portion of the building protecting windows and doors
without arming other zones.
Stay Arming Your System
Logon to the LCD Keypad by entering your [USER CODE] followed by the enter key.
Office
is DISARMED
The display will show the area associated with the LCD Keypad you have logged on to and the current status. If
you have access to more than one area you are able to scroll the areas using the [] and [] keys.
To search for an area by name press the [MEMORY] key to open the search screen.
Office
Enabling zone(s)
To Next Page
Loading...
