PRT-KLCD Protege Alphanumeric LCD Keypad User Manual | April 2011 29
Use the up [] key to scroll the display to the next zone.
Warehouse PIR
is BYPASSED
Press the [1] key to bypass the zone. Press the [3] key to latch bypass the zone or press the [2] key to remove
the bypass setting.
Latch Bypassing Zones
Latched bypassing allows a zone to be permanently bypassed and can be used when a zone is removed due to
building maintenance or on going changes.
The list of zones that are available to be bypassed are dependent on the configuration settings of a
keypad and the area being controlled. In some cases zones may not be available to be bypassed, in
such a case a message will be shown to you.
To Next Page
Loading...
