PRT-KLCD Protege Alphanumeric LCD Keypad User Manual | April 2011 51
The display will show the secondary floor group selection. A secondary floor group if programmed will be used if
the assigned schedule is not valid. This allows an access level to be assigned floor groups based on the time of
the day. By default this is set to None and is disabled if a schedule of None is programmed. Use the [1] and [3]
keys to scroll the records. The arrow Î on the top line indicates it is a scroll selection entry screen.
FG010 Block 01
[********]
The display will show the option entry screen for the first eight floors that belong to the floor group. An option can
be toggled on and off (including a floor into the group) by using the numerical keys [1] to [8]. To view the options
in text entry mode press the [STAY] key.
Depending on the number of floors that are available in the system the number of programmable
blocks of floors will be restricted.
FG010 Block XX
[********]
The display will show the next block of 8 floors that belong in the group. Pressing [ENTER] will move to the next
block of floors until you return to the floor group selection screen.
To Next Page
Loading...
