IDEC FT1A Series User Manual

S MART AXIS P RO /L ITE U SER ' S M ANUAL FT9Y-B1378 2-3
2: P RODUCT S PECIFICATIONS
(15) Power/Run Status LED [PWR/RUN]
A green LED that turns on or flashes to indicate the power supply and operation status.
Not available on the SmartAXIS Pro.
(16) Error Status LED [ERR]
A red LED that turns on if an error occurs.
Not available on the SmartAXIS Pro.
(17) Sensor Power Terminals
For supplying power to sensors (24V DC). Not available on the DC power type.
Power/Run Status LED Status
OFF Power is not supplied.
ON Power is supplied and the user program is being executed.
Slow Flash (1-sec interval) Power is supplied and the user program is stopped.
Error Status LED Status
OFF Normal operation
ON An error has occurred.
Slow Flash (1-sec interval) The SmartAXIS is running and the forced I/O function is enabled.
Quick Flash (100 ms interval) The user program is stopped and the forced I/O function is enabled.

IDEC FT1A Series Specifications

General

Programming Software	WindLDR
Type	Programmable Logic Controller (PLC)
Display	LCD (varies by model)
Communication Ports	RS232C/RS485 (built-in), USB (programming), Ethernet (optional)
Dimensions	Varies by model
Weight	Varies by model
Model	FT1A Series