To Next PageTo Next Page
Need help?Do you have a question about the Identivision IP-N410 and is the answer not in the manual?
General| Brand | Identivision |
|---|---|
| Model | IP-N410 |
| Category | Recording Equipment |
| Language | English |
Provides a general description of the series DVR, its features, and applications.
Instructions for inspecting the DVR for any visible damage after unboxing.
Step-by-step guide for installing the hard disk drive into the NVR unit.
Details on connecting audio and video signals to and from the NVR.
Instructions for powering on the NVR unit and initial indicator status.
Methods and procedures for safely shutting down the NVR system.
Guide to accessing the NVR system via user login and default credentials.
Using the wizard for easy camera configuration and network setup.
Details on the control buttons used within the preview interface.
Overview of the main system menu accessed from the desktop shortcut.
Instructions for accessing and playing recorded video files.
Procedure for backing up recorded video data to external storage.
Configuration options for different recording schedules and modes.
Adjusting image parameters like brightness, contrast, and saturation.
Controlling the Pan-Tilt-Zoom functions of connected cameras.
Advanced PTZ operations such as preset, cruise, and scan.
Settings for saving monitor images at intervals or upon events.
Configuring motion detection sensitivity, area, and recording triggers.
Settings for detecting video signal loss or masking.
Configuration for detecting and responding to video signal loss.
Handling abnormal events like storage issues or network problems.
Basic system settings including time, date, language, and HDD status.
Configuration of IP address, subnet mask, gateway, and DNS settings.
Setup for network services like PPPoE, NTP, Email, DDNS, and FTP.
Customizing the graphical user interface display settings.
Configuring patrol display modes and interval times.
Managing hard disk drives, including setup, formatting, and status checks.
Managing user accounts, permissions, and group settings.
Viewing and managing currently connected network users.
Procedure for upgrading the device firmware via USB disk or client software.
Importing and exporting system configuration settings.
Displays detailed information about the installed hard disk drives.
Shows real-time code stream (Kb/S) and hard disk capability (MB/H).
Accessing and reviewing system operation, configuration, and alarm logs.
Displays basic information like hardware, software edition, and build date.
Fundamental concepts of IP addresses, TCP ports, DHCP, and POE.
Initial steps for connecting cameras and ensuring network stability.
Methods for assigning static IP addresses to cameras using CMS or Upgrade Tool.
Detailed steps for configuring static IP addresses via CMS software.
Instructions for setting up port forwarding on the router if UPNP is unavailable.
Procedure for adding and configuring IP cameras to the NVR.
Enabling cloud access and remote viewing via the xmeye.net service.
Accessing the device remotely using its factory number.
Setting up a profile to access multiple devices remotely.
Guidelines for regular cleaning, grounding, and proper handling of the DVR.
