IFM Electronic CR0451 - Using Ifm Maintenance Tool

45
ifm System Manual ecomatmobile BasicDisplay (CR0451) V01
Limitations and programming notes Programming notes for CoDeSys projects
6.2.7 Using ifm maintenance tool
8492
Available for the following devices:
- BasicController: CR040n
- BasicDisplay: CR0451
- PDM360: CR1050, CR1051, CR1060
- PDM360compact: CR1052, CR1053, CR1055, CR1056
- PDM360NG: CR108n
The ifm Maintenance Tool serves for easy transfer of the program code from the programming station
to the controller. As a matter of principle each application software can be copied to the controllers
using the ifm Maintenance Tool. Advantage: A programming system with CoDeSys licence is not
required.
Safety-related application software MUST be copied to the controllers using the ifm Maintenance Tool
so as not to falsify the checksum by which the software has been identified.