IFM Electronic CR0451 - 9.4.4 Fbs for Raw-Can (Receiving Messages); Fbs for RAW-CAN (Receiving Messages)

98
ifm System Manual ecomatmobile BasicDisplay (CR0451) V01
CAN in the PDM360 CAN-FBs on layer 2 (RAW-CAN)
9.4.4 FBs for RAW-CAN (receiving messages)
CAN_RX.......................................................................................................................................99
CAN_RX_RANGE ..................................................................................................................... 100
CAN_RX_RANGE_FIFO........................................................................................................... 102
CAN_RX_ENH .......................................................................................................................... 104
CAN_RX_ENH_FIFO................................................................................................................ 106
7611
Here you will find function blocks for receiving CAN messages on the OSI layer 2.