IFM Electronic CR0451 - Page 97

97
ifm System Manual ecomatmobile BasicDisplay (CR0451) V01
CAN in the PDM360 CAN-FBs on layer 2 (RAW-CAN)
Parameters of the outputs
7510
Parameter Data type Description
RESULT BYTE feedback of the function block
(possible messages  following table)
Possibly values for RESULT:
Value
dec | hex
Description
000 00 function block is not active
008 08 function block is active
009 09 CAN is not active
250 FA Error: FiFo is full – data was lost