IFM CR711S - Software description

53
ifm Programming Manual ecomatController/60-1 (CR711S) Operating System V2.5.0.n 2017-12-19
System description Software description
>
5.3 Software description
Overview: Software ............................................................................................................................. 53
Software module for the device ........................................................................................................... 55
23148
>
5.3.1 Overview: Software
23511
We differentiate between the following software components:
>
Software on the PC/notebook.
23518
The programming environment CODESYS Development System is installed in the PC/notebook to
create and debug both applications. The controller supports service and maintenance via CODESYS
or via other tools.
The CODESYS functions are extended with Config plugins. Thereby, additional setting options for
memory and inputs/outputs become available. ifm electronic provides adequate device descriptions
for the CODESYS Development System for each derivative. IEC libraries for the safe and non-safe
applications provide CODESYS and the programmer with access options to the functions of the
controller.