IFM CR711S - Activate the Access Protection for a Project

63
ifm Programming Manual ecomatController/60-1 (CR711S) Operating System V2.5.0.n 2017-12-19
Getting started Activate the access protection for a project
>
6.6 Activate the access protection for a project
21783
► Familiarise yourself with the following CODESYS functions!
 Protect and save project
→ Online help > CODESYS Development System > Protect and save project
The user can use a password to protect the device from unauthorised access.
► Select [Project] > [Project Settings...].
> Window [Project Settings] appears.
► Select [Security].
► Activate checkbox [Enable project file encryption].
► Enter the requested password in the field [New password].
► Enter the entered password again in the field [Confirm new password].
► Select [OK] to activate the access protection for the project.
> Access protection is activated. Project is encrypted.