IFM ecomat 100 R 360 Series User Manual

page 7
The user is responsible for the safe functioning of the
application programs which he creates himself. If
necessary, he must additionally obtain an approval
according to the corresponding national regulations by the
relevant testing and supervisory organisations.
1.3. Controller configuration
The ecomat R 360 is a customer or application-specific concept
for series use which means that the control modules have the
optimum configuration to the application. If necessary, special
functions and special hardware solutions can be accomplished.
In general: All descriptions and explanations in this manual
are generally applicable to the controller system ecomat R
360. The appropriate controller configuration for the unit in
use is to be loaded in the programming system (article
number of the unit, CRnnnn = file name controller
configuration CRnnnn_X).
Before using the controller modules you need to check the
availability of certain functions, hardware options, inputs and
outputs are available in the hardware.

IFM ecomat 100 R 360 Series Specifications

General

Brand	IFM
Model	ecomat 100 R 360 Series
Category	Controller
Language	English