IGS OVERTAKE VR - Operator Settings; Main Menu Operation

29
3.2 Main Menu Operation
Make sure the cabinet is turned on and the game is displayed on the screen.
 Open the door below the calibrate view button and press the 【
【【
【Test】 button to
enter operator settings, the screen will display as below:
Enter the menu and follow the instructions:
 Use the 【
【【
【Calibrate View】 button and 【
【【
【Ready】button move the cursor, and
the item where the cursor is pointed to will appear in red.
 Use the 【
【【
【Start】 button to confirm or enter the sub menu.
 After setup or testing is completed, return to operator settings and move the
cursor to 【Exit】. Then press the 【
【【
【Start】 button to return to the game.
Note: When warning message appear as：Caution!! Process 【
【【
【I/O
adjustment】
】】
】 【
【【
【Country】
】】
】 【
【【
【Store】
】】
】 【
【【
【Connection】
】】
】 【
【【
【Air spring
adjustment】
】】
】 setting. Please process the following setting before exit
operator settings.