43
3.3 System settings
In the page of 【System settings】, you can set up the system.
Enter 【Operator Settings】→【2.System settings】, and the screen will
display as below:
Use the 【Calibrate View】 button and 【Ready】 button to choose the item,
then press the 【Start】 button to enter the sub menu.
When the setting is completed, move the cursor to 【2-10.Back】， and press
the 【Start】 button to return to 【Operator Settings】.
Regarding the detailed descriptions of the sub menu in 【System settings】,
refer to the following content.
To Next Page
Loading...
